206
The direct printing procedure is done entirely with the camera
while you look at the LCD monitor.
1
Set the camera’s power switch to
<2>.
2
Set up the printer.
For details, see the printer’s
instruction manual.
3
Connect the camera to the
printer.
Use the interface cable provided with
the camera.
When connecting the cable plug to
the camera’s <q/C>
terminal, the cable plug’s <D> icon
must face the front side of the
camera.
To connect to the printer, refer to the
printer’s instruction manual.
4
Turn on the printer.
5
Set the camera’s power switch to
<1>.
Some printers may make a beeping
sound.
Preparing to Print
Connecting the Camera to a Printer
To Next Page
Loading...
