Canon imageCLASS LBP121dn - Page 137

- HTTP [Use HTTP](P. 215)
-
IPP printing
[IPP Print Settings](P. 214)
-
mDNS (IPv4)
[mDNS Settings](P. 211)
-
mDNS (IPv6)
[mDNS Settings](P. 211)
Setting the Functions and Security to Be Used with AirPrint
AirPrint uses the IPP protocol.
Y
ou can congure the settings to encrypt communication with TLS and congure IPP authentication when using
the protocol.
Congure these settings using Remote UI from a computer. You cannot use the operation panel to congure the
settings.
Administrator privileges are required.
Required Preparations
● When encrypting communication with TLS, specify the k
ey and certicate to use for TLS encrypted
communication.
Using TLS(P. 153)
1
Log in to Remote UI in System Manager Mode. Starting Remote UI(P. 179)
2
On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of
Remote UI(P
. 181)
3
Click [Network Settings]
[IPP Print Settings] [Edit].
➠ The [Edit IPP Print Settings] scr
een is displayed.
4
Congure the IPP settings.
When Restricting the Functions to Use
Clear the [Use IPP Printing] checkbo
x.
When you clear the checkbox, printing with AirPrint is no longer possible.
When Encrypting Communication with TLS
Select the [Allo
w Only When Using TLS] or [Use TLS] checkbox.
When Setting IPP Authentication
Select the [Use Authentication] checkbox, and set the user name to be used for IPP authentication using
single-byte alphanumeric characters.
To set a password, select the [Set/Change Password] checkbox, and enter the same password in both
[Password] and [Conrm] using single-byte alphanumeric characters.
Printing with AirPrint now requires authentication, and only users who know the user name and password of
IPP authentication can use these functions.
5
Click [OK].
➠ The settings ar
e applied.
Linking with Mobile Devices
130