Canon imageCLASS LBP121dn - Page 221

Specify whether to use the LPD protocol. Conguring LPD
, RAW, or WSD(P. 172)
If the LPD protocol is used, you can also set the time from the start of reception standby, after print data reception is
canceled, to the timeout.
[LPD Print Settings]
[Off]
[On]
[RX Timeout]
1 to 5 to 60 (min.)
[RAW Settings]
[Menu] [Preferences] [Network] [TCP/IP Settings]
Specify whether to use the RA
W protocol.
Conguring LPD
, RAW, or WSD(P. 172)
If the RAW protocol is used, you can also set the time from the start of reception standby, after print data reception is
canceled, to the timeout.
[RAW Print Settings]
[Off]
[On]
[RX Timeout]
1 to 5 to 60 (min.)
[WSD Settings]
[Menu] [Preferences] [Network] [TCP/IP Settings]
Specify whether to use the WSD pr
otocol. You can specify this setting for each of the functions that use the WSD
protocol.
Conguring LPD
, RAW, or WSD(P. 172)
[WSD Print Settings]
[Use WSD Print]
[Off]
[On]
[Use WSD Br
owsing]
[Off]
[On]
[Use Multicast Discovery]
[Off]
[On]
[IPP Print Settings]
[Menu] [Preferences] [Network] [TCP/IP Settings]
Specify whether to use IPP (Internet Printing Pr
otocol). You can use IPP when printing with AirPrint.
Setting the
Functions and Security to Be Used with AirPrint(P
. 130)
When using IPP, you can also specify whether TLS encryption is used for communication.
Settings Menu Items
214