[Timeout]
[Menu] [Function Settings] [Printer] [Printer Settings]
Specify the time fr
om the start of waiting to receive print data until reception times out when print data reception is
interrupted.
5 to 15
to 300 (sec.)
[Speed/Print Side Priority for 2-Sided]
[Menu] [Function Settings] [Printer] [Printer Settings]
Specify whether to print the last page on one side of the paper when using 2-sided printing and the last page
number is odd, or the last page is blank or cannot be printed and ends with an odd page number.
● T
o print the last page on one side of the paper, select [Speed Priority].
● To print the last page on both sides of the paper, select [Print Side Priority].
When using paper printed with a logo for example, selecting [Print Side Priority] aligns the orientation and print
side with that of other pages.
[Speed Priority]
[Print Side Priority]
[Check Paper Size in Tray]
[Menu] [Function Settings] [Printer] [Printer Settings]
Specify whether to determine the paper size in the paper sour
ce and the paper size in the printer driver.
When [On] is selected, printing is canceled if the paper sizes do not match.
[Off]
[On]
[Recovery Printing]
[Menu] [Function Settings] [Printer] [Printer Settings]
Specify whether to r
esume printing from the page where an error that stops printing occurred after the error is
resolved.
* When [Off] is selected, the page where the error occurred is not printed. Printing resumes from the next page, but it
may resume two pages later when using 2-sided printing and depending on when the error occurred.
[Off]
[On]
[UFR II]
[Menu] [Function Settings] [Printer] [Printer Settings]
Specify the print data pr
ocessing method used when the UFR II Printer Driver is used.
Settings Menu Items
235
To Next Page
