Canon imageCLASS LBP121dn - Page 249

Specify whether the logs for printing are shown on the Status Monitor screen.
[Status Monitor] Screen(P. 82)
Checking Usage and Logs with Remote UI(P. 183)
[Off]
[On]
[Displ. Consmbls. Info (RUI/Toner Status)]
[Menu] [Management Settings] [Device Management]
Specify whether a button that accesses sites for purchasing toner cartridges is displayed in Toner Status and
Remote UI. Y
ou can also specify whether Toner Status is used.
● Specify whether to show the button in Remote UI in [Displ. Consumables Purchase Button (RUI)].
● Specify whether to use Toner Status in [Toner Status] in the [Toner Status Settings].
● If you opt to use Toner Status, use [Displ Cnsmbl Purch Btn] in the [Toner Status Settings] to specify whether to
show the button.
Toner Status sends notication of the remaining amount of toner in the machine to the computer on which the tool is
installed. Download Toner Status from the Canon website for your country/region, and install it on your computer.
https://global.canon/en/support/
* If the machine is supplied with a CD-ROM or DVD-ROM, you can also use this to install Toner Status.
[Displ. Consumables Purchase Button (RUI)]
[Off]
[On]
[T
oner Status Settings]
[Off]
[On]
[Displ Cnsmbl Purch Btn]
[Off]
[On]
[Notify to Check Paper Settings]
[Menu] [Management Settings] [Device Management]
Specify whether the Notify to Check Paper Settings scr
een appears when the paper drawer is loaded into the machine.
Loading Paper in the Paper Drawer(P. 88)
[Off]
[On]
[Canon Genuine Mode]
[Menu] [Management Settings] [Device Management]
Specify whether to switch to Canon Genuine Mode.
● Normally
, there is no need to change this setting.
● Your Canon service representative may change this setting. If this setting is not displayed, contact the
machine’s administrator.
Settings Menu Items
242