Canon imageCLASS LBP162dw - Changing Print Settings

◼ Changing the Setting of Functions Available with AirPrint
If you want to disable functions that you ar
e not going to use with AirPrint or encrypt communications, congure the
necessary setting using the Remote UI.
Changing Print Settings
To perform printing with AirPrint, IPP protocol is used.
Turning the Function On/Off
You can specify whether to perform printing with AirPrint. The factory default setting is [On].
Log in to the Remote UI in System Manager Mode ( Starting Remote UI(P. 179) )
[Settings/Registration] [Network Settings] [TCP/IP Settings] [Edit] in [IPP Print Settings]
Clear or select the [Use IPP Printing] check box [OK]
Changing the TLS Setting
Y
ou can specify whether to encrypt communications using TLS when performing printing with AirPrint. The factory
default setting is [On].
Log in to the Remote UI in System Manager Mode ( Starting Remote UI(P. 179) )
[Settings/Registration] [Network Settings] [TCP/IP Settings] [Edit] in [IPP Print Settings]
Clear or select the [Use TLS] check box [OK]
Displaying the Screen for AirPrint
Y
ou can display the screen for AirPrint, on which you can not only access the AirPrint Settings but also view
information about consumables, such as toner cartridges, etc. Further, you can congure security function settings.
1
Select [System Preferences]
[Printers & Scanners], then add the machine to the Mac
you ar
e using.
● If the machine has alr
eady been added, this operation is not required.
2
Select this machine from the list of printers in [Printers & Scanners].
3
Click [Options & Supplies].
4
Click [Show Printer Webpage].
Linking with Mobile Devices
132