Setting Up Connection Using WPS Push Button Mode
23FJ-00H
If your wir
eless router supports WPS push button mode, you can easily set up a connection with a WPS button.
● Ho
w to operate the wireless router may vary on each device. See the instruction manuals for your
networking device for help.
1
Select <Menu> in the Home screen.
Home Screen(P. 87)
2
Select <Network Settings>.
● If the scr
een for entering a PIN appears, enter the correct PIN.
Setting the System Manager PIN(P. 145)
3
Select <Wireless LAN Settings>.
● If the <Dir
ect Connection will be disabled. Is it OK?> message is displayed, select <Yes>.
4
Read the message that is displayed, and select <OK>.
5
Select <WPS Push Button Mode>.
6
Select <Yes>.
7
Press and hold the WPS button on the wireless router.
● The button must be pr
essed within 2 minutes after selecting <Yes> in step 6.
● Depending on the networking device, you may need to press and hold the button for 2 seconds or longer.
See the instruction manuals for your networking device for help.
If an error message is displayed during setup
● Select <Close> and r
eturn to step 5.
8
Wait until message <Connected.> is displayed.
Setting Up
27
To Next Page
Loading...
