Canon imageCLASS LBP162dw - Auto Detect

<Waiting Time for Connection at Startup>
Specify a wait time for connecting to a network. Select the setting depending on the network environment. Setting a
W
ait Time for Connecting to a Network(P. 60)
0
to 300 (sec.)
<Ethernet Driver Settings>
Select the communication mode of Ethernet (half-duple
x/full-duplex) and the Ethernet type (10BASE-T/100BASE-TX).
You can also view the MAC address of the machine.
<Auto Detect>
Select whether to automatically detect or manually select the communication mode and the Ethernet type.
Conguring Ethernet Settings(P
. 57)
<Off>
<Communication Mode>
<Half Duplex>
<Full Duplex>
<Ethernet Type>
<10BASE-T>
<100BASE-TX>
<On>
<MAC Address>
Check the MAC address of the machine, which is a number unique to each communication device. Viewing
the MA
C Address for Wired LAN(P. 44)
<IEEE 802.1X Settings>
Enable or disable IEEE 802.1X authentication.
Conguring IEEE 802.1X Authentication Settings
(P. 170)
<Off>
<On>
<Initialize Network Settings>
Select to r
eturn the Network Settings to the factory defaults.
<Initialize Menu>(P. 235)
Setting Menu List
205