Setting Up Connection Using WPS PIN Code Mode
23FJ-00J
If your wir
eless router supports WPS PIN code mode, generate a PIN code with the machine and register the code to
the networking device.
● Ho
w to operate the wireless router may vary on each device. See the instruction manuals for your
networking device for help.
From a Computer
1
Access your wireless router from a computer and display the screen for entering a
WPS PIN code.
● For more information, see the instruction manuals for your networking device.
From the Operation Panel
2
Select <Menu> in the Home screen. Home Screen(P. 87)
3
Select <Network Settings>.
● If the scr
een for entering a PIN appears, enter the correct PIN.
Setting the System Manager PIN(P. 145)
4
Select <Wireless LAN Settings>.
● If the <Dir
ect Connection will be disabled. Is it OK?> message is displayed, select <Yes>.
5
Read the message that is displayed, and select <OK>.
6
Select <WPS PIN Code Mode>.
7
Select <Yes>.
➠ The PIN code is gener
ated and shown on the display.
From a Computer
8
Register the generated PIN code to the wireless router.
● Register the PIN code on the setup scr
een displayed in step 1.
Setting Up
29
To Next Page
Loading...
