Canon imageCLASS LBP162dw - Specifying IP Addresses for Firewall Settings

Specifying IP Addresses for Firewall Settings
23FJ-035
Y
ou can either limit communication to only devices with specied IP addresses, or block devices with specied IP
addresses but permit other communications. You can specify a single IP address or a range of IP addresses.
● For mor
e information about the basic operations to be performed when setting the machine from the
Remote UI, see
Setting Up Menu Options from Remote UI(P. 187) .
1
Start the Remote UI and log in to System Manager Mode. Starting Remote
UI(P
. 179)
2
Click [Settings/Registration] on the Portal page.
Remote UI Screen(P. 180)
3
Select [Security Settings] [IP Address Filter].
4
Click [Edit] to specify a lter type.
[IPv4 Address: Inbound Filter]
Restrict data r
eceived by the machine from a computer by specifying an IPv4 address.
[IPv6 Address: Inbound Filter]
Restrict data received by the machine from a computer by specifying an IPv6 address.
5
Specify the settings for packet ltering.
Managing the Machine
152