Canon imageCLASS LBP162dw - Setting the System Manager PIN

Setting the System Manager PIN
23FJ-031
Set a System Manager PIN that is intended e
xclusively for Administrators. You can access <Network Settings>, <System
Management Settings>, etc. only when the PIN has been entered correctly. It is recommended that only
Administrators know the PIN.
1
Select <Menu> in the Home screen.
Home Screen(P. 87)
2
Select <System Management Settings>.
3
Select <System Manager Information Settings> <System Manager PIN>.
4
Press .
5
Specify the System Manager PIN.
● Enter a number of up to se
ven digits, and press
.
● When <PIN (Conrm)> is displayed, enter the PIN once again to conrm.
● Y
ou cannot set a PIN that consists only of zeros, such as "00" or "0000000."
● To disable the PIN, select <
> and press to leave the text box blank, and then select <Apply> and
pr
ess
.
Setting the System Manager Name
1
Select <System Manager Name>.
2
Enter the System Manager Name, and select <Apply>.
● On ho
w to enter text, see
Entering Text(P. 93) .
● Do not forget your PIN. If you forget your PIN, contact your local authorized Canon dealer or the Canon help
line.
Managing the Machine
145