Canon imageCLASS LBP162dw - Density Fine Adjustment; Binding Location

<Special Settings 2>
<Menu> <Printer Settings> <Print Quality> <Special Print Mode> Select <Special Settings
1> or <Special Settings 2>
<Resolution>
Specify the resolution to be used for print data processing.
<1200 dpi>
<600 dpi>
<Menu> <Printer Settings> <Print Quality> <Resolution> Select <1200 dpi> or <600 dpi>
<Density Fine Adjustment>
Finely adjust the density. You can specify this setting only when <1200 dpi> is selected in <Resolution>.
-1 to 0 to +1
<Menu> <Printer Settings> <Print Quality> <Density Fine Adjustment> Specify the density
<Layout>
Specify the page layout settings such as binding position.
<Binding Location>
If you are binding the printouts with a binding tool such as a stapler, use this item to specify whether to bind on
the long or short edge.
<Long Edge>
<Short Edge>
<Menu> <Printer Settings> <Layout> <Binding Location> Select <Long Edge> or <Short
Edge>
Setting Menu List
218