Canon imageCLASS LBP162dw - Setting Ipv4 Address

Setting IPv4 Address
23FJ-00U
The machine's IPv4 address can be either assigned automatically by a dynamic IP
addr
essing protocol, such as DHCP, or entered manually. When connecting the
machine to a wired LAN, make sure that the connectors of the LAN cable are rmly
inserted into the ports (
Connecting to a Wired LAN(P. 24) ). Y
ou can test the
network connection if necessary.
Setting IPv4 Address(P. 38)
Testing the Network Connection(P. 39)
Setting IPv4 Address
1
Select <Menu> in the Home screen.
Home Screen(P. 87)
2
Select <Network Settings>.
● If the scr
een for entering a PIN appears, enter the correct PIN.
Setting the System Manager PIN(P. 145)
3
Select <TCP/IP Settings> <IPv4 Settings> <IP Address Settings>.
4
Congure IP addr
ess settings.
<Auto Acquire>
Select to automatically assign an IP addr
ess via DHCP protocol. When <On> is displayed, automatic
addressing is enabled.
<Manually Acquire>
Select to congure the IP address settings by manually entering an IP address. In order to select this option,
the automatic acquirement must be set to <Off>.
<Check Settings>
Select when you want to view the current IP address settings.
Automatically assigning an IP address
1
Select <Auto Acquire>.
2
Select the protocol.
● Select <Select Pr
otocol>
<DHCP>.
If you do not want to use DHCP/BOOTP/RARP to assign an IP address
Setting Up
38