Canon imageCLASS LBP162dw - Setting up Connection by Selecting a Wireless Router

Setting Up Connection by Selecting a Wireless Router
23FJ-00K
Y
ou can search the wireless routers (or access points) available for connection and select one from the display of the
machine. For the network key, enter a WEP key or PSK. Before selecting a wireless router, check and write down the
required setup information, including the SSID and network key (
Checking the SSID and Network Key(P. 36) ).
Security settings
● If the wir
eless connection is set up by selecting a wireless router, the WEP authentication method is set to
<Open System> or the WPA/WPA2 encryption method is set to <Auto> (AES-CCMP or TKIP). If you want to
select <Shared Key> for WEP authentication or <AES-CCMP> for WPA/WPA2 encryption, you need to set up
the connection using <Enter Manually>.
Setting Up Connection by Specifying Detailed Settings(P. 33)
1
Select <Menu> in the Home screen. Home Screen(P. 87)
2
Select <Network Settings>.
● If the scr
een for entering a PIN appears, enter the correct PIN.
Setting the System Manager PIN(P. 145)
3
Select <Wireless LAN Settings>.
● If the <Dir
ect Connection will be disabled. Is it OK?> message is displayed, select <Yes>.
4
Read the message that is displayed, and select <OK>.
5
Select <SSID Settings>.
6
Select <Select Access Point>.
➠ The machine starts sear
ching for available wireless routers.
● If
a message is displayed telling that access point cannot be found, see
Countermeasures for Each
Message
(P. 285) .
7
Select a wireless LAN router.
● Select the r
outer whose SSID matches the one that you have written down, and press
.
Setting Up
31