Canon imageCLASS LBP162dw - Daylight Saving Time Settings; Auto Sleep Time

<Daylight Saving Time Settings>
Enable or disable daylight saving time. If daylight saving time is enabled, specify the dates from which and to
which daylight saving time is in effect. Setting the Date/Time (P. 19)
<Off>
<On>
Start: Month, W
eek, Day
End: Month, Week, Day
<Auto Sleep Time>
If the machine has not been operated or has had no data to process for a specied period of time, the machine enters
sleep mode to save energy consumption (Auto Sleep). Specify the period of time after which auto sleep is performed.
Auto Sleep is not performed when the setting menu is displayed. We recommend using the factory default settings to
save the most power. Entering Sleep Mode(P. 113)
1 to 30 (min.)
<Auto Reset Time>
If a key is not pressed for a specied period of time, the scr
een and the settings are initialized to display the
default screen (Auto Reset). Specify the interval at which the Auto Reset is performed. The Auto Reset is not
performed in the following cases:
● The setting menu is displayed.
● The machine is processing data, such as when printing documents.
● An error message is displayed and the Alarm indicator is blinking (However, Auto Reset is performed when the
error does not prevent the user from continuing to use a function.)
0 (Auto Reset is disabled.)
1 to 2
to 9 (min.)
<Menu> <Timer Settings> <Auto Reset Time> Specify the Auto Reset time
Setting Menu List
212