Canon imageCLASS LBP162dw - Selecting Wired LAN or Wireless LAN

Setting Up Using the Setup Guide
23FJ-00A
When the machine is turned on ( Turning ON the Machine(P. 83) ) for the rst time, the Setup Guide starts up to
assist you to congur
e the initial settings of the machine by following the on-screen guidance. In the Setup Guide, the
setting screens are displayed in the following order.
Step 1 Setting the Display Language and the Country or Region
Set the language to be displayed on the operation panel screen or in reports, as well as the
country or r
egion where the machine will be used.
1
Select a language.
2
Select a country or region.
Step 2 Setting the Date and Time
Adjust the machine's date/time.
1
Select a time zone.
What is UTC?
● Coor
dinated Universal Time (UTC) is the primary time standard by which the
world regulates clocks and time. The correct UTC time zone setting is required
for Internet communications.
2
Enter the date and time, and press
.
Step 3 Setting the Wireless LAN
Congure the settings to connect to the network using the wir
eless LAN.
1
Select <Yes>.
● Select <No> to nish the Setup Guide without conguring the wireless LAN
settings. Read the displayed message, and press
.
2
Select <OK>.
3
Select the setting method.
● For mor
e information about the wireless LAN settings, see
Connecting to a
Wir
eless LAN(P. 25) .
4
Read the message that is displayed, and press
.
➠ When the Setup Guide is complete, the Home scr
een appears.
Setting Up
18