Canon imageCLASS LBP162dw - Setting a Wait Time for Connecting to a Network

Setting a Wait Time for Connecting to a Network
23FJ-067
When a network is designed to enjo
y redundant connectivity with multiple switching hubs or bridges, it must have a
mechanism to prevent packets from looping. One effective solution is to dene the role of each switch port. However,
communication may still be disrupted for several tens of seconds immediately after you change the way that network
devices are connected, or if you add a new device. If this type of problem occurs, set a wait time for connecting to the
network.
1
Select <Menu> in the Home screen.
Home Screen(P. 87)
2
Select <Network Settings>.
● If the scr
een for entering a PIN appears, enter the correct PIN.
Setting the System Manager PIN(P. 145)
3
Select <Waiting Time for Connection at Startup>.
4
Enter the waiting time required to start a communication with the network, and
pr
ess
.
LINKS
Conguring Ethernet Settings(P
. 57)
Changing the Maximum Transmission Unit(P. 59)
Setting Up
60