5
Specify SNMPv1 settings.
● If you do not need to change SNMPv1 settings, pr
oceed to the next step.
[Use SNMPv1]
Select the check bo
x to enable SNMPv1. You can specify the rest of SNMPv1 settings only when this check box
is selected.
[Use Community Name 1]/[Use Community Name 2]
Select the check box to specify a community name. If you do not need to specify a community name, clear
the check box.
[Community Name]
Enter alphanumeric characters for the name of the community.
[MIB Access Permission]
For each community, select [Read/Write] or [Read Only] for the access privileges to MIB objects.
[Read/Write] Permits both viewing and changing the values of MIB objects.
[Read Only] Permits only viewing the values of MIB objects.
[Use Dedicated Community]
Dedicated Community is a pr
eset community, intended exclusively for Administrators using Canon software.
Select the check box to use Dedicated Community, and specify [MIB Access Permission]. If you do not need to
use Dedicated Community, clear the check box.
6
Specify SNMPv3 settings.
● If you do not need to change SNMPv3 settings, pr
oceed to the next step.
Setting Up
66
To Next Page
Loading...
