Canon imageCLASS LBP325dn - LOG GR.

Service Mode > FUNCTION GR.
Service Mode > FUNCTION GR. > ARRIVALl TIME LOG
OUTPUT TO USB USB flash drive output of on-arrival logs
Detail To output on-arrival logs to a USB flash drive.
Use Case
Debug function used in case of malfunction on arrival
Adj/Set/Operate Method
Select the item, and then press OK key.
Related Service Mode
OUTPUT TO SUBLOG
DELETE LOGS Initialization of on-arrival logs
Detail To initialize the storage memory area for on-arrival logs.
Use Case
When the initialization of on-arrival logs is required
Adj/Set/Operate Method
Select the item, and then press OK key.
■ MEAP
Service Mode > FUNCTION GR. > MEAP
CDS-CTL Switching of countries to obtain firmware for via CDS
Detail To switch countries to obtain firmware for via CDS.
Adj/Set/Operate Method
Select the item, and then press OK key.
Display/Adj/Set Range
JP,US,GB,FR,DE,IT,AU,SG,NL,KR,CN,TW,ES,SE,PT,NO,DK,FI,PL,HU,CZ,SI,GR,EE,RU,SK,R
O,HR,BG,TR,CA,LA,HK
Supplement/Memo
MEAP installed model only
CDS-FIRM Permission setting for user administrator to update firmware
Detail To set whether to allow the user administrator to update firmware.
Adj/Set/Operate Method
Select the item, and then press OK key.
Display/Adj/Set Range
Off/On
Default Value
On
Supplement/Memo
MEAP installed model only
CDS-LVUP Permission setting for service technician and user administrator to use periodical update
function
Detail To set whether to allow service technicians and user administrators to use the periodical update
function.
Adj/Set/Operate Method
Select the item, and then press OK key.
Display/Adj/Set Range
Off/On
Default Value
Off
Supplement/Memo
MEAP installed model only
CDS-MEAP Permission setting for user administrator to install MEAP application
Detail To set whether to allow the user administrator to install MEAP applications.
Adj/Set/Operate Method
Select the item, and then press OK key.
Display/Adj/Set Range
Off/On
Default Value
Off
Supplement/Memo
MEAP installed model only
CDS-UGW Permission setting for firmware update from UGW
Detail To set whether to allow firmware update from the UGW.
Adj/Set/Operate Method
Select the item, and then press OK key.
Display/Adj/Set Range
Off/On
Default Value
Off
Supplement/Memo
MEAP installed model only
9. Service Mode
222