Canon imageCLASS MF3010 - Scanning an Image Using an Application

Scanning an Image Using an Application
85RS-032
Y
ou can scan an image from a TWAIN- or WIA- compliant application and use the image in that application. The
procedure varies depending on the application. This section shows an example.
1
Place your document.
" Placing Documents
(P. 43) "
" Supported Document T
ypes(P. 67) "
NOTE
When scanning from the platen glass
Scanning multiple pages is not available when scanning fr
om the platen glass.
2
Start the application to be used.
3
Select a scan command.
4
Select a scanner driver.
5
Specify the scanner settings as needed and click [Scan].
Scanning starts.
See the follo
wing sections for more information.
" Using the ScanGear MF
(P. 132) "
" Scanning Using the WIA Driver(P
. 117) "
Scan
116