Canon imageCLASS MF3010 - Enlarging;Reducing Copy

Basic Copy Operations
85RS-022
For details on each k
ey function for the operation panel and the display, see the following items.
" Oper
ation Panel and Display(P. 25) "
<Before copying>
If the [ ] indicator is on or other than [1] is displayed, the previous copy settings are
r
emained. In this case, press [
] to reset the copy settings.
If a key is not pressed for 2 minutes, the copy settings will be automatically reset.
Operating results Operating procedures
Place the document.
" Placing Documents
(P. 43) "
" Supported Paper T
ypes(P. 70) "
Press [ ] or [ ] to specify the copy quantity.
Specify the cop
y quantity rst.
You can set the copy quantity to "F" or "1" to "9."
You can register the custom copy quantity (user-dened
number up to twenty-nine copies) to "F
." The pre-dened
settings comes useful if you copy a certain number of
quantity, or want to copy more than 10 sets.
" Registering the Quantity that Y
ou Frequently Copy
(Up to Twenty-nine Copies)(P. 78) "
Press [ ] (Menu setting key) to specify the following settings
if necessary
.
" Selecting Copy Type (Speed Priority/Resolution
Priorlty)(P. 88) "
" Emphasizing the Outline of an Image (Sharpness)
(P. 90) "
Press [ ] (Copy setting key) to specify the
follo
wing settings if necessary.
The indicator is moved to [ ] → [ ] →
[ ] each time you press the key.
[ ]
:
"
Adjusting
the
Density(P
.
79) "
Copy
76