Canon imageCLASS MF3010 - Printing Problems

Printing Problems
85RS-03W
See the follo
wing sections.
The printout is har
dly readable and printed poorly.(P. 166)
The printout is printed ask
ew.(P. 166)
Cannot print documents fr
om a computer.(P. 166)
The printout is hardly readable and printed poorly.
● The printout is too light or has uneven density.
● Vertical white streaks appear on the printout.
● The printout has spots and is dirty.
● The printout is askew.
● The toner does not ow well into the paper.
See the following section:
" The Cop
y Output is Hardly Readable and Copied Poorly(P. 165) "
The printout is printed askew.
Make sure that the number of sheets or the paper type loaded in the paper cassette meets the paper
specications.
Supported Paper T
ypes(P. 70)
Adjust the paper guides to the paper width without space. If the problem persists, load paper with the
other side face up, or in an opposite orientation.
Loading Paper
(P. 46)
Make sure that the output tray is not full.
Cannot print documents from a computer.
See the following section:
" Cannot Print Documents fr
om a Computer(P. 167) "
Troubleshooting
166