Initializing Menus
85RS-01A
Y
ou can reset the following settings to the default value.
● Paper type settings
● Registering the quantity
● Setting copy type
● Setting sharpness
● Setting special mode
● The quantity registered in "F"
Operating results Operating procedures
Press [ ] (Menu setting key), and then start the menu
oper
ation.
When the menu is operating, the menu indicator blinks.
Press [ ] or [ ] until "I" is displayed.
Press [ ] to perform initialization.
Press [ ] (Menu setting key) to exit the menu operation.
The menu indicator turns off.
Basic Operation
56
To Next Page
Loading...
