Canon imageCLASS MF3010 - Copying Two Documents Onto One Sheet (2 on 1 Copy)

Copying Two Documents onto One Sheet (2 on 1 Copy)
85RS-027
Y
ou can copy the two documents onto one sheet by reducing the size.
<Before copying>
If the [ ] indicator is on or other than [1] is displayed, the previous copy settings are
r
emained. In this case, Press [
] and reset the settings.
If a key is not pressed for 2 minutes, the copy settings will be automatically reset.
NOTE
You can copy with the combined functions.
" Registering the Quantity that Y
ou Frequently Copy (Up to Twenty-nine Copies)(P. 78) "
" Adjusting the Density
(P. 79) "
" Selecting Cop
y Type (Speed Priority/Resolution Priorlty)(P. 88) "
" Emphasizing the Outline of an Image (Sharpness)(P
. 90) "
Paper size requirements
A size larger than A4 or Letter.
Operating results Operating procedures
Place the document.
" Placing Documents
(P. 43) "
" Supported Paper T
ypes(P. 70) "
Press [ ] or [ ] to specify the copy quantity.
Specify the cop
y quantity rst.
You can set the copy quantity to "F" or "1" to "9."
You can register the custom copy quantity (user-dened
number up to twenty-nine copies) to "F
." The pre-dened
settings comes useful if you copy a certain number of
quantity, or want to copy more than 10 sets.
Copy
86