Canon imageCLASS MF3010 - Using Advanced Mode

Using Advanced Mode
85RS-03A
Scanning in advanced mode(P
. 136)
Advanced mode toolbar(P
. 137)
Advanced mode settings(P
. 138)
Scanning in advanced mode
1
Display the ScanGear MF.
Start the ScanGear MF using either of the following methods.
● Selecting [Display the Scanner Driver] in the MF T
oolbox
● Starting from an application
2
Click [Advanced Mode].
3
Specify the settings.
Favorite Settings(P
. 138)
Input Settings
(P. 138)
Output Settings
(P. 139)
Image Settings(P
. 139)
Color Settings
(P. 141)
Pr
eferences(P. 144)
4
Click [Preview].
Scan
136