3. Holding
the Roll Holder so that the side with the white gear faces the side of the Roll Holder Slot with a white gear,
load the Roll Holder shaft (a) into the grooves (b) on both ends of the Roll Holder Slot.
Caution
• Be
careful not to pinch your fingers between the Roll Holder shaft (a) and the guide grooves (b) when
loading rolls.
Note
• For
instructions on attaching the Roll Holder to rolls, see "Attaching the Roll Holder to Rolls."
→P.623
Handling Paper
>
Handling rolls
>
iPF815 Loading Rolls in the Printer
7
629
To Next Page
Loading...
