Canon MV430 - Page 81

Dubbing _ QQ
1. Find a point on your recorded cassette slightly before the
section you want to copy and set it to playback pause mode.
2. Press the camcorder’s REC PAUSE button.
• The camcorder enters record pause mode.
3. Start playback on the other digital device while you monitor the
picture.
4. Press the pause button.
• Recording starts.
5. When you get to the point where you want to stop recording,
press the stop button or the pause button.
• Recording stops.
6. Stop playback on the other device.
|j§ Notes:
- If the cable is not connected properly, or if the cable is unconnected when
you press REC PAUSE, the camcorder displays the caution “CHECK THE
DV INPUT” An anomalous image may also flash onto the screen.
• Blanks between recordings on the playback tape are recorded as anomalous
images on the tape that is being recorded to.
• During DV dubbing, you cannot add digital effects.
81
Editing