CHAPTER 9 INSTALLATION
COPYRIGHT
©
1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
9-3
Work Checks and remarksStep
Remove the shipping attachment [2] (black
screw) from the right side of the machine.
4
Shipping attachment [2]
You will be storing the shipping attachment
[2] inside the machine in step 9.
Take out the protective member from the
manual feed tray. (Multifeeder type only)
Caution:
This step applies only if the manual feed tray
is attached.
5
Protective member
Attach the manual feed tray that comes with
the machine. (Multifeeder type only)
Caution:
This applies only if the manual feed tray
comes packaged with the machine.
Manual feed tray
To Next Page
Loading...
