Carrier TRANSICOLD Vector 8500 User Manual

3–17 62-11640
3.12 LANGUAGE SELECTION
NOTE
Language Selection may not be available on early software revisions.
1. With the system powered up (START/RUN-OFF switch in the START/RUN position) or in PC Mode press
the MENU key until LANGUAGE is displayed.
2. Press the LANGUAGE soft key to display the language screen. The language screen will display with a 10
second timeout.
3. Press the ▲ or ▼ key to scroll through the available selections.
4. With the desired language highlighted, press the “=” key. The highlighted language will become active and
“LANGUAGE CHANGED” will be displayed.
CONTINUOUS
START/STOP
MENU
ALARM
COOLDIESELSTART/STOP
INTELLISET
Viewing Menu Soft Key
Selections
Press Menu Key to Scroll
PRETRIP HOUR
METERS
UNIT
DATA
DEFROST
COOLDIESELSTART/STOP
LANGUAGE
Viewing Menu Soft Key
Selections
Press Menu Key to Scroll
DATA
RECORDER
EXIT
1
2
LANGUAGE
BACK EXIT
English
Españo
English
Spanish

Carrier TRANSICOLD Vector 8500 Specifications

General

Brand	Carrier TRANSICOLD
Model	Vector 8500
Category	Automobile Accessories
Language	English