39
Application measurement, individual settings menu group (Select )
This second level menu group includes settings for selection and execution of alternative
calibration method (see 10.2, 10.3.1), zero tracking on/off (see 11.4), stability detection band
setting (see 11.3), unit selection/removal (see 12.1), Auto Print on/off, analog display on/off,
auto-memory & zeroing mode on/off, and net total measurement mode on/off.
System settings menu group (Select )
This second level menu group includes various settings related to calibration such as settings
for the type of regular-use calibration (see 10.3, 10.4), as well as information entries for
mediums required for specific gravity measurement (see 13.2, 13.3) and settings related to
the clock.
Communication settings menu group (Select )
This second level menu group includes settings for communication formats for connecting
the balance to external devices (see 14.3). There are standard formats prepared beforehand
and user-defined formats that allow itemized selection.
Mass display
Execute the preset calibration method (see 10.2, 10.3.1)
WindowsDirect setting (down) (see 6.2.1)
WindowsDirect setting (right) (see 6.2.1)
Settings check display (see 7.4.1)
Standard mode
Pouring mode
Settings for Stability and Response (see 11.2)
Anti-convection mode
High-stability mode
Entry to second level
(application measurement, individual settings menu group)
Entry to second level (system settings menu group)
Entry to second level (communication settings menu group)
Mass display
(Example)
(Example)
To Next Page
Loading...
Need help?
General
