40
7.4 Useful Functions Related to Menu
7.4.1 Settings Check Display
From mass display, press the [CAL] key four times to display the confirmation of the
current settings. Displayed as abbreviations are the three kinds of environmental settings
(see 11.), ON/OFF for the fully-automatic span calibration(see 10.3.2,10.3.3), and ON/OFF
for the GLP/GMP/ISO compliant calibration report output.(see 10.4.1)
The weight symbol appears when either or both of the fully-automatic span calibration PSC
or Clock-CAL are on.
7.4.2 Returning to Default Settings (Menu reset)
This will return all the settings to default. The reference value stored in previous use of piece
counting or percentage conversion and the set time of Interval Timer function will also be
cleared. The default settings are indicated with “ # ” on the Menu Map.
1 Press the [CAL] key repeatedly until
“SEttinG” appears. Press the [O/T] key.
The display shows “CAL dEF”.
2 Press the [CAL] key repeatedly until the
display shows “rESEt”.
Press the [O/T] key.
The display shows “rESEt?” for confirmation.
3 Press the [O/T] key one more time.
...