75
5 Pressing the [UNIT] key repeatedly from the
mass display switches the display to “,d”.
Note that “g” also appears during weight
measurement in air.
6 Press the [O/T] key.
7 Place the items to be measured on the pan.
8 When the stability mark appears, press the
[CAL] key.
9 Place the items to be measured on the
immersed hanging pan. The display shows the
density of the measured item. “dSP oL” may
appear when nothing is on the pan, which is
normal.
10 To make the next measurement, unload the
pans, press [CAL], and begin again at Step 5.
x Although the density display shows 4 decimal places, not all of these digits will
stabilize depending on the conditions.
x When the items to be measured are placed in the liquid, they must be
completely immersed and must not have bubbles adhering to the surface of
the sample or the immersed hanging pan.
(Example)
(Example)
To Next Page
Loading...
Need help?
General
