243
•You can specify the location of the new list (List 1 through List 6) with a
statement like: A List 1 → List 2. You cannot specify another memory or
ListAns as the destination of the A List operation. An error also occurs if you
specify a A List as the destination of the results of another A List operation.
• The number of cells in the new list is one less than the number of cells in the
original list.
•Note that an error occurs if you execute A List for a list that has no data or only
one data item.
uu
uu
uTo transfer list contents to Matrix Answer Memory
[OPTN]-[LIST]-[L→M]
K1(LIST)2(L→M)1(List) <list number 1-6> ,1(List) <list
number 1-6> ) w
•You can input the following as many times as necessary to specify more than
one list in the above operation.
, <list number 1-6>
Example To transfer the contents of List 1 (2, 3, 6, 5, 4) and List 2 (11, 12,
13, 14, 15) to Matrix Answer Memory
AK1(LIST)2(L→M)
1(List)b,1(List)c)w
Manipulating List Data 17 - 3
To Next Page
Loading...
