34
1-5 Program (PRGM) Menu
To display the program (PRGM) menu, first enter the RUN or PRGM Mode from
the Main Menu and then press ! W. The following are the selections
available in the program (PRGM) menu.
• {COM} … {program command menu}
• {CTL} … {program control command menu}
• {JUMP} … {jump command menu}
• {?} … {input command}
• {
^^
^^
^} … {output command}
• {CLR} … {clear command menu}
• {DISP} … {display command menu}
• {REL} … {conditional jump relational operator menu}
• {I/O} … {input/output control command menu}
• {
: } … {multistatement connector}
The function key menu appears if you press ! W in the RUN Mode or the
PRGM Mode while binary, octal, decimal, or hexadecimal is set as the default
number system.
• {Prog}/{JUMP}/{?}/{
^^
^^
^}/{REL}/{ : }
The functions assigned to the function keys are the same as those in the Comp
Mode.
For details on the commands that are available in the various menus you can
access from the program menu, see “20. Programming”.
P. 351
To Next Page
Loading...
Need help?
General
