Cebora 553 - 7.3 Saved Programs (JOB Management)

79/89
7�2�7 Quality Control
This function enables checking that the arc voltage remains within
preset values.
Select minimum voltage (V MIN) or maximum voltage (V MAX) then
conrmtosetinterventionvalue.
OFF corresponds with disabled function. If, during welding, the
voltage does not correspond to the values set, the wording QUALITY
CONTROL appears. Press knob B to delete the error and return to the
welding screen.
7�3 Saved programs (SECTOR L)
The welding parameters (process, ignition, mode etc.) can be saved within the JOB sector
Select and conrm the JOB sector.
LEGEND of SYMBOLS
save
retrieve
delete
copy