Chroma 19032 - Page 81

GPIB/RS232 Operation Description (IEEE-488.2)
5-15
[:SOURce]:SAFEty:RESult:ALL:TIME[:ELAPsed]:RAMP?
This command queries elapse time of ramp of all steps.
Example : Input command “SAFE:RES:ALL:TIME: RAMP?”
Return message “1.000000E+00”
Description: Return message “1.000000E+00” means ramp to the setting voltage
time is 1 second.
[:SOURce]:SAFEty:RESult:ALL:TIME[:ELAPsed][:TEST]?
This command queries the test time of all steps.
Example : Input command “SAFE:RES:ALL:TIME?”
Return message “3.000000E+00”
Description : Return message “3.000000E+00” means the test needed time result
is 3 seconds.
[:SOURce]:SAFEty:RESult:ALL:TIME[:ELAPsed]:DWELl?
This command queries the test dwell time of all steps.
Example : Input command “SAFE:RES:ALL:TIME:DWEL?”
Return message “2.500000E+00”
Description: Return message “2.500000E+00” means the test dwell time is 2.5
seconds.
[:SOURce]:SAFEty:RESult:ALL:TIME[:ELAPsed]:FALL?
This command queries the test fall time of all steps.
Example : Input command “SAFE:RES:ALL:TIME:FALL?”
Return message “2.500000E+00”
Description: Return message “2.500000E+00” means the test fall time is 2.5
seconds.
[:SOURce]:SAFEty:RESult:ALL[:JUDGment]?
This command queries the judgment results of all steps. Return formats are:
First Step Result, Second Step, Result..., Last Step Result.
Code meaning list:
Mode
GB
AC
DC
IR
LC
OSC
ALL
Code
HEX
DEC
HEX
DEC
HEX
DEC
HEX
DEC
HEX
DEC
HEX
DEC
HEX
DEC
STOP
70
112
USER STOP
71
113
CAN NOT
TEST
72
114
TESTING
73
115
PASS
74
116
HIGH FAIL
11
17
21
33
31
49
41
65
51
81
LOW FAIL
12
18
22
34
32
50
42
66
52
82
ARC FAIL
23
35
33
51
HIGH FAIL
24
36
34
52
54
84
64
100
CHECK FAIL
35
53
OUTPUT A/D
OVER
16
22
26
38
36
54
46
70
56
86
66
102
METER A/D
OVER
17
23
27
39
37
55
47
71
57
87
67
103
CURR FAIL
18
24
POWER HIGH
FAIL
58
88