Chroma 19053 - Page 81

GPIB Operation Description (Option)
: OPEN?
: SOURce: SAFEty: STEP: OSC: LIMit: OPEN?
This command queries selected STEP which setting percentage is
judged by open circuit as detecting short/open circuit.
Example: Input command “SAFE: STEP 4: OSC: LIM: OPEN?”
Return message “3.000000E-01”
Description: Return message “3.000000E-01” means open circuit
judgment percentage of the main unit STEP 4 as
detecting short/open circuit is 30%.
:SHORt <numeric_value>
: SOURce: SAFEty: STEP: OSC: LIMit: SHORt
This command sets selected STEP which setting percentage is
judged by short circuit as detecting short/open circuit.
Example: Input command “SAFE: STEP 4: OSC: LIM: SHOR 3”
Description: This command means short circuit judgment
percentage of the main unit STEP 4 as detecting
short/open circuit is set to 300%.
SHORt?
: SOURce: SAFEty: STEP: OSC: LIMit: SHORt?
This command queries selected STEP which setting percentage is
judged by short circuit as detecting short/open circuit.
Example: Input command “SAFE: STEP 4: OSC: LIM: SHORt?”
Return message “3.000000E+00”
Description: Return message “3.000000E+00” means short circuit
judgment percentage of the main unit STEP 4 as
detecting short/open circuit is 300%.
: CHANnel
[: HIGH] <channel_list>
: SOURce: SAFEty: STEP: OSC: CHANnel: HIGH
This command sets the status of scanning test high voltage output
channel.
Example: Input command “SAFE: STEP 4: OSC: CHAN(@(1,3))”
Description: This command means output channel of scanning test
of the main unit STEP 4 is set to channel 1 and 3 HIGH
output.
Example: Input command “SAFE: STEP 4: OSC: CHAN(@(0))”
Description: This command means output channel of scanning test
of the main unit STEP 4 is set to OFF.
[: HIGH]?
: SOURce: SAFEty: STEP: OSC: CHANnel: HIGH?
This command queries the status of scanning test high voltage
output channel.
Example: Input command “SAFE: STEP 4: OSC: CHAN?”
Return message “(@(1,3))”
Description: Return message “(@(1,3))” means output channel
status of scanning test of the main unit STEP 4 is
channel 1 and 3 HIGH output.
5-31
www.valuetronics.com