Fuel Economy
Push and release the up or down arrow button
until the Fuel Economy Menu item is highlighted in the
instrument cluster display. The Fuel Economy Menu will
display the following:
•
Two submenu pages that can be toggled between
using the left
and right arrow buttons; one
with Current Value displayed and one without the
Current Value displayed:
○ Average Fuel Economy (MPG, L/100 km, or km/L)
○ Range To Empty (miles or km)
○ Current Fuel Economy (MPG, L/100 km, or km/L)
○ The Max and Min values will correspond to the
particular engine requirements
•
Hold OK to reset average fuel economy information.
Trip Info
TRIP INFO GASOLINE
Push and release the up or down arrow button
until the Trip Menu item is highlighted in the instrument
cluster display. Push the left
or right arrow but-
ton to scroll through the Trip A and Trip B submenus.
The Trip information will display the following:
•
Distance
•
Average Fuel Economy
•
Elapsed Time
Hold the OK button to reset feature information.
TRIP INFO PHEV
Push and release the up or down arrow button
until Trip Info is highlighted in the instrument cluster
display. Push the left
or right arrow button to
scroll through the Trip A and Trip B submenus. The Trip
information will display the following:
Trip A
•
Distance Electric
•
Distance Hybrid
•
Distance Total
•
Average Energy Economy
•
Elapsed Time
Hold the OK button to reset feature information.
Trip B
•
Distance Electric
•
Distance Hybrid
•
Distance Total
•
Average Energy Economy
•
Elapsed Time
Hold the OK button to reset feature information.
Stop / Start – If Equipped
Push and release the up or down arrow button
until the Stop/Start menu title is displayed in the instru-
ment cluster display.
Audio
Push and release the up or down arrow button
until the Audio Menu displays in the instrument cluster
display.
Messages
Push and release the up or down arrow button
until Messages is highlighted in the instrument cluster
display. This feature shows the number of stored
warning messages. Pushing the right
arrow button
will allow you to see what the stored messages are.
NOTE:
The pop-up messages indicate the status of the system
and/or the conditions that need to be met. Messages
remain in the stored stack until condition is cleared.
Screen Setup
Push and release the up or down arrow button
until the Screen Setup Menu displays in the instrument
cluster display. Push and release the OK button to enter
the submenus. The Screen Setup feature allows you to
change what information is displayed in the instrument
cluster as well as the location that information is
displayed.
BASE INSTRUMENT CLUSTER DISPLAY
SCREEN SETUP OPTIONS
Push and release the up or down arrow button
until the Screen Setup Menu displays in the instrument
cluster display. Push and release the OK button to enter
the submenus. The Screen Setup feature allows you to
change what information is displayed in the instrument
cluster as well as the location that information is
displayed.
108 GETTING TO KNOW YOUR INSTRUMENT PANEL
To Next Page
Loading...
