4. To put the seat back into original position, just pull
back on the seatback and lock the seat into
position.
WARNING!
Do not use this feature with a child in seat. Serious
injury or death may occur.
Easy Entry — With The Seat Folded Flat
The seats can be folded and tilted for more accessibility
for passengers to enter and exit the third row.
1. Without a child seat installed, you can fold the seat
by pulling the recliner handle on the bottom part of
the seat. Before pulling the recliner lever, make sure
the arm rests are folded up.
2. To put it back into position, pull back on the folded
seat and make sure that it locks into position. Then,
pull the seatback toward the back and fold down the
arm rests.
Exit For Third Row Passengers — Stow ‘n Go Seats Only
If the second row is equipped with Stow ‘n Go, third row
passengers can pull on the strap and push the seat
forward for folding the seatback down and tilting the
seat to the floor for an easy exit.
NOTE:
This process is for when there is no child seat installed.
Use the easy entry lever if a child seat is installed.
Second Row Removable Quad Seat
The second row quad seats, not equipped with the Stow
‘n Go feature, are removable for added cargo space.
Removing Seat
1. Adjust seat to the full rearward position.
2. Lift the recline lever to fold the seatback flat against
the seat cushion.
NOTE:
Push downward on the seatback to make sure it is
in the locked position.
3. The release strap is located on the front of the seat,
near the floor.
Easy Tilt With Child Seat Installed
Recliner Lever
Pull Strap For Third Row Passengers
Lift Recline Lever And Fold Seatback Flat
42 GETTING TO KNOW YOUR VEHICLE
To Next Page
Loading...
