WARNING!
•
In a collision, you or others in your vehicle could be
injured if seats are not properly latched to their
floor attachments. Always be sure the seats are
fully latched.
•
Sitting in a seat with the head restraint in its low-
ered position could result in serious injury or death
in a collision. Always make sure the head
restraints are in their upright positions when the
seat is to be occupied.
Stow 'n Go Seating
On vehicles equipped with Stow 'n Go seating, the sec-
ond and third row seats can be folded into the floor for
convenient storage.
AUTO ADVANCE ‘N RETURN — IF EQUIPPED
On vehicles equipped with the Auto Advance ‘n Return
feature, the front seat will move forward automatically
to a location that will allow the second row Stow ‘n Go
seat movement, without interference by the front seat.
After the second row seat is stowed, the front seat will
move back to the previous location once the Auto
Advance ‘n Return button is pushed again.
The Auto Advance ‘n Return feature is available to both
the front driver and passenger power seats
(if equipped).
WARNING!
During power seat operation, personal injury or cargo
damage may occur. Ensure the front seat is not occu-
pied and the seat travel path is clear when operating
the power seat.
A one-touch Auto Advance ‘n Return button is located
on the B-pillar trim panel, just in front of the power slid-
ing door.
Using the Auto Advance ‘n Return Feature
NOTE:
•
The button is only functional when the power sliding
door is open and the vehicle is in PARK. If the door
is not open or the vehicle is not in PARK when the
button is pushed, the front seat will not move and a
message will be displayed in the instrument cluster
display.
•
If the power sliding door is closing when the button
is pushed, the front seat will not move and a mes-
sage will be displayed in the instrument cluster
display.
•
The Auto Advance ‘n Return feature will not function
if the front doors are open.
1. Push and release the Auto Advance ‘n Return
button.
2. Perform the second row Stow ‘n Go seat movement
page 46.
3. Push and release the Auto Advance ‘n Return button
a second time. The front seat cushion and seatback
will return to the original starting location.
NOTE:
•
To abort seat operation while seat is in motion, push
the Auto Advance ‘n Return button, or push the front
power seat button to stop the seat movement. Push-
ing the Auto Advance ‘n Return button again will
return the front seat to the original starting location.
•
The Auto Advance ‘n Return system includes
obstacle detection. When the system detects an
obstacle, the seat will stop, reverse direction, and
return to the previous location. A message will be
displayed in the instrument cluster indicating that
an obstacle has been detected.
•
If the front seat is already in a location that will
allow space for Stow ‘n Go of the second row seat,
the front seat will not move and a message will be
displayed in the instrument cluster.
•
If calibration of the front seat is lost, the seat will
automatically recalibrate when the Auto Advance ‘n
Return button is pushed. This may result in the seat
cushion moving forward and downward, before mov-
ing to the location that will allow space for the sec-
ond row Stow ‘n Go seat movement.
Auto Advance ‘n Return Button (Left Side Shown)
GETTING TO KNOW YOUR VEHICLE 45
2
To Next Page
Loading...
