SECOND ROW STOW 'N GO
For Manual Seats: To stow the seat in the floor, move
the front seat all the way forward using the manual seat
adjustment bar. Move the seatback all the way forward
using the recliner handle located on the outboard side
of the cushion. Move the seat height to at least mid
position using the height adjuster handle in the out-
board side of the cushion.
For Power Seats: Push the Auto Advance ‘n Return but-
ton located on the B-pillar trim (if equipped)
page 45.
1. To access the storage area, remove the floor mat (if
equipped) and place the lock rod in the locked
position.
NOTE:
○
Push the lock rod inward for the unlocked
position.
○
Pull outward on the lock rod for the locked
position.
○
For information on storage bin function with the
seats rearward
page 78.
2. Pull the latch located near the second row seat to
open the floor panel.
3. Pull the floor panel and position it toward the front
seats while folding the top half down, and rest it
against the front seats.
4. Remove the plastic storage bin (if equipped) from
the storage area, and store in a safe location.
5. Fold the armrest upward and stow the seat by grab-
bing the strap on the lower part of the seatback,
and guide the seat into the storage area.
6. Push down on the seatback to lock the seat into the
storage area.
Lock Rod
Floor Latch
Push Panel Forward
Pull Strap
Push To Lock
46 GETTING TO KNOW YOUR VEHICLE