Cisco 2950 - Catalyst Switch

Index
IN-8
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
78-11380-10
cross-stack UplinkFast, STP
connecting stack ports
16-8
described 16-5
enabling 16-17
fast-convergence events 16-7
Fast Uplink Transition Protocol 16-6
limitations 16-7
normal-convergence events 16-7
Stack Membership Discovery Protocol 16-6
support for 1-4
cross talk 13-10
cryptographic software image 9-33
customer premises equipment
See CPE
D
daylight saving time 8-14
debugging
enabling all system diagnostics
32-20
enabling for a specific feature 32-20
redirecting error message output 32-21
using commands 32-19
default commands 2-4
default configuration
802.1x
10-9
auto-QoS 30-10
banners 8-19
booting 5-12
CDP 24-2
DHCP 20-5
DHCP option 82 20-5
DHCP snooping 20-5
DNS 8-18
EtherChannel 31-8
IGMP filtering 21-22
IGMP snooping 21-6
IGMP throttling 21-22
initial switch information 5-3
default configuration (continued)
Layer 2 interfaces
11-9
MAC address table 8-23
MSTP 15-12
MVR 21-17
NTP 8-4
optional spanning-tree features 16-13
password and privilege level 9-2
QoS 30-18
RADIUS 9-20
RMON 26-3
RSPAN 25-7
SNMP 28-6
SPAN 25-7
STP 14-11
system message logging 27-3
system name and prompt 8-16
TACACS+ 9-13
UDLD 23-4
VLAN, Layer 2 Ethernet interfaces 17-17
VLANs 17-7
VMPS 17-27
voice VLAN 19-2
VTP 18-6
default gateway 5-10
deleting VLANs 17-10
description command 11-14
destination addresses, in ACLs 29-12
detecting indirect link failures, STP 16-9
device discovery protocol 24-1
Device Manager 4-9
DHCP-based autoconfiguration
client request message exchange
5-4
configuring
client side
5-4
DNS 5-7
relay device 5-7
server-side 5-5, 20-6
TFTP server 5-6