Cisco 2950 - Catalyst Switch

Index
IN-17
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
78-11380-10
monitoring (continued)
network traffic for analysis with probe
25-1
port
protection
22-13
port protection 22-13
speed and duplex mode 11-12
traffic flowing among switches 26-1
traffic suppression 22-13
VLANs 17-14
VMPS 17-30
VTP 18-16
MSTP
boundary ports
configuration guidelines
15-12
described 15-5
BPDU filtering
described
16-3
enabling 16-15
BPDU guard
described
16-2
enabling 16-14
CIST, described 15-3
configuration guidelines 15-12, 16-13
configuring
forward-delay time
15-20
hello time 15-19
link type for rapid convergence 15-22
maximum aging time 15-21
maximum hop count 15-21
MST region 15-13
path cost 15-18
port priority 15-17
root switch 15-14
secondary root switch 15-16
switch priority 15-19
CST
defined
15-3
operations between regions 15-3
default configuration 15-12
MSTP (continued)
default optional feature configuration
16-13
displaying status 15-23
enabling the mode 15-13
EtherChannel guard
described
16-11
enabling 16-18
extended system ID
effects on root switch
15-14
effects on secondary root switch 15-16
unexpected behavior 15-15
instances supported 14-9
interface state, blocking to forwarding 16-2
interoperability and compatibility among modes 14-10
interoperability with 802.1D
described
15-5
restarting migration process 15-22
IST
defined
15-2
master 15-3
operations within a region 15-3
loop guard
described
16-12
enabling 16-19
mapping VLANs to MST instance 15-13
MST region
CIST
15-3
configuring 15-13
described 15-2
hop-count mechanism 15-4
IST 15-2
supported spanning-tree instances 15-2
overview 15-2
Port Fast
described
16-2
enabling 16-13
preventing root switch selection 16-11