Cisco 4500M Command Reference

2-82
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
dot1x initialize
dot1x initialize
To unauthorize an interface before reinitializing 802.1x, use the dot1x initialize command.
dot1x initialize interface
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC
Command History
Usage Guidelines Use this command to initialize state machines and to set up the environment for fresh authentication.
Examples This example shows how to initialize the 802.1x state machines on an interface:
Switch# dot1x initialize
Switch#
Related Commands dot1x initialize
show dot1x
interface The number of the interface.
Release Modification
12.1(12c)EW Support for this command was introduced on the Catalyst 4500 series switch.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English