Cisco 4500M Command Reference

2-55
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
debug ip verify source packet
debug ip verify source packet
To debug IP source guard messages, use the debug ip verify source packet command. To disable
debugging output, use the no form of this command.
debug ip verify source packet
no debug ip verify source packet
Syntax Description This command has no arguments or keywords.
Defaults Debugging of snooping security packets is disabled.
Command Modes Privileged EXEC
Command History
Examples This example shows how to enable debugging for IP source guard:
Switch# debug ip verify source packet
Switch#
This example shows how to disable debugging for IP source guard:
Switch# no debug ip verify source packet
Switch#
Related Commands ip dhcp snooping
ip dhcp snooping information option
ip dhcp snooping limit rate
ip dhcp snooping trust
ip verify source vlan dhcp-snooping (refer to Cisco IOS documentation)
show ip dhcp snooping
show ip dhcp snooping binding
show ip verify source (refer to Cisco IOS documentation)
Release Modification
12.1(12c)EW Support for this command was introduced on the Catalyst 4500 series switch.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English