Cisco 4500M Command Reference

2-9
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
attach module
attach module
To remotely connect to a specific module, use the attach module configuration command.
attach module mod
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged
Command History
Usage Guidelines This command applies only to the Access Gateway Module on Catalyst 4500 series switches.
The valid values for mod depend on the chassis used. For example, if you have a Catalyst 4006 chassis,
valid values for the module are from 2 to 6. If you have a 4507R chassis, valid values are from 3 to 7.
When you execute the attach module mod command, the prompt changes to Gateway#.
This command is identical in the resulting action to the session module mod and the remote login
module mod commands.
Examples This example shows how to remotely log in to an Access Gateway Module:
Switch# attach module 5
Attaching console to module 5
Type 'exit' at the remote prompt to end the session
Gateway>
Related Commands remote login module
session module
mod Target module for the command.
Release Modification
12.1(19)EW This command was first introduced.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English