Cisco 4500M Command Reference

2-65
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
debug smf updates
debug smf updates
To debug software MAC filter (SMF) address insertions and deletions, use the debug smf updates
command. To disable debugging output, use the no form of this command.
debug smf updates
no debug smf updates
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes Privileged EXEC
Command History
Examples This example shows how to debug SMF updates:
Switch# debug smf updates
Software MAC filter address insertions and deletions debugging is on
Switch#
Related Commands undebug smf (same as no debug smf)
Release Modification
12.1(8a)EW Support for this command was introduced on the Catalyst 4500 series switch.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English