Cisco 4500M

2-102
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
flowcontrol
Examples This example shows how to enable send flow control:
Switch(config-if)# flowcontrol receive on
Switch(config-if)#
This example shows how to disable send flow control:
Switch(config-if)# flowcontrol send off
Switch(config-if)#
This example shows how to set receive flow control to desired:
Switch(config-if)# flowcontrol receive desired
Switch(config-if)#
Related Commands interface port-channel
interface range
interface vlan
show flowcontrol
show running-config (refer to Cisco IOS Documentation)
speed