Cisco 4500M Command Reference

2-114
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2Cisco IOS Commands for the Catalyst 4500 Series Switches
ip arp inspection limit (interface)
Examples This example shows how to limit the rate of incoming ARP requests to 25 packets per second:
Switch# config terminal
Switch(config)# interface fa6/3
Switch(config-if)# ip arp inspection limit rate 25
Switch(config-if)# end
Switch# show ip arp inspection interfaces fastEthernet 6/3
Interface Trust State Rate (pps)
--------------- ----------- ----------
Fa6/3 Trusted 25
Switch#
This example shows how to limit the rate of incoming ARP requests to 20 packets per second and to set
the interface monitoring interval to 5 consecutive seconds:
Switch# config terminal
Switch(config)# interface fa6/1
Switch(config-if)# ip arp inspection limit rate 20 burst interval 5
Switch(config-if)# end
Related Commands show ip arp inspection

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English