Cisco 4500M

2-268
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2Cisco IOS Commands for the Catalyst 4500 Series Switches
show flowcontrol
Examples This example shows how to display flow control status on all the gigabit interfaces:
Switch# show flowcontrol
Port Send FlowControl Receive FlowControl RxPause TxPause
admin oper admin oper
----- -------- -------- -------- -------- ------- -------
Gi1/1 desired off off off 0 0
Gi1/2 on disagree on on 0 0
Gi3/1 on on on on 0 0
Gi3/2 desired off off off 0 0
Gi3/3 desired off off off 0 0
Gi3/4 off off on on 0 0
Gi3/5 desired off off off 0 0
Gi3/6 desired off off off 0 0
Switch#
This example shows how to display the flow control status on module 1:
Switch# show flowcontrol module 1
Port Send FlowControl Receive FlowControl RxPause TxPause
admin oper admin oper
----- -------- -------- -------- -------- ------- -------
Gi1/1 desired off off off 0 0
Gi1/2 on disagree on on 0 0
Switch#
This example shows how to display the flow control status on interface 3/4:
Switch# show flowcontrol interface gigabitethernet 3/4
Port Send FlowControl Receive FlowControl RxPause TxPause
admin oper admin oper
----- -------- -------- -------- -------- ------- -------
Gi3/4 off off on on 0 0
Switch#
Related Commands flowcontrol
show interfaces status